Anji Jiahe Fluorourubber Made Products Co.,Ltd

Product Categories

Contact Us

Anji Jiahe Fluorous Rubber Co.,Ltd

Add:Dahe Village, Xiaofeng Town, Anji County, Huzhou, Zhejiang, China (Mainland)

Con:Mr Hu




Home > News > Content

FEP for High-Speed Extrusion, Small Calibe Wire, Aerospace

Basic Info

Model NO.:DS618Synthetic Resin:Polyamide Resin
Natural Resin:RosinCharacteristic:Thermoplastic Resin
Molecular Principal Chain:Carbon Chain PolymerColor:Transparent
Trademark:GodboatOrigin:Anji Jiahe Flourorubber Made Products Co.,Ltd 
HS Code:39046900

FEP Powder DS618

Product description:
Fluorinated Ethylene Propylene resin is the copolymer of TFE and HFP, with good thermal
stability ,outstanding chemical inertness, good electrical insulation, and low coefficient of
friction, enabling thermoplastic processing methods. DS618 are high molecular weight resins
of low melt index, with low extrusion temperature, high extrusion speed which is 5-8
times of ordinary FEP resin. It is soft, anti-burst, and has good toughness.
Conformable with Q/0321DYS 003-2013

Technical Index:


AppearanceTranslucent particle, with impurities such as metal debris and sand
, containing visible black particles percentage point less than 2%

Melting Index, g/10min16.1~2020.1~2424.1~2812.1~16
Tensile Strength, ≥, Mpa20181620
Elongation at break, ≥, %300270250300
Relative Gravity2.14~2.17

Melting Point, ºC265±10


Diselectric Constant(106HZ),≤7.0×10-4


Main Application:
Mainly for aviation and aerospace industry, the MTR transport vehicles, automatic switching
equipment ,well test equipment ,flame alarm systems, high-rise buildings,
fiber regional wires, cables, computers, communication networks, electrical fields, particularly
applicable for high-speed extrusion small-caliber wire insulation material. It is more
economical when used in where no high stress cracking resistance is required.

The processing temperature should not exceed 420ºC, to prevent toxic gas from releasing.

Packaging,Transportation and Storage:
1.Packed in double layer PVC bags, 25kg, then closed in overpack bags, every bag with certification.
2.Stored in clean ,cool and dry places, avoid contamination from foreign substances such as dust and moisture.
3.Nontoxic, noninflammable, inexplosive, non-corrosion, the product is transported according to nonn-dangerous product.

Product Description

Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML
Company Profile
ANJI JIAHE FLUOROURUBBER MADE PRODUCTS CO.,LTD is one of the leading China teflon sheet, PTFE sheet, teflon tube, PTFE tube, PTFE membrane manufacturers and suppliers, equipped with a productive teflon sheet factory, we are able to offer you cheap products. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
Contact Us
Address: Dahe Village, Xiaofeng Town, Anji County, Huzhou, Zhejiang, China (Mainland)
Tel: 0086-572-5501131  Fax:0086-572-5501133
Copyright © Anji Jiahe Fluorourubber Made Products Co.,Ltd