Anji Jiahe Fluorourubber Made Products Co.,Ltd

Product Categories

Contact Us

Anji Jiahe Fluorous Rubber Co.,Ltd

Add:Dahe Village, Xiaofeng Town, Anji County, Huzhou, Zhejiang, China (Mainland)

Con:Mr Hu




Home > News > Content

FEP Tube Need To Determine What Important Factors

  FEP tube need to determine what important factors

  FEP tube is a typical plastic products, because these products are more special materials, so the daily use of the need for special care. To know the FEP pipe is produced through the inflation process, in its application process, the need to determine what important factors?

  After forming the FEP tube due to the susceptibility to temperature, so try not to put it in direct sunlight where exposure, so as to avoid the role of ultraviolet light to accelerate its aging. But also to avoid heat and storm, so as not to FEP tube due to thermal expansion and contraction and shorten the service life. Not only too cold, overheated, there are places where the sun can not place FEP tube, it can not be placed in the wet and air is not the place of circulation, the same will reduce its quality. If you have not used the FEP tube for a long time, be sure to check carefully before using it to prevent the bad consequences of cracks.

  At the same time, we should also fully consider the effect of the crystallinity of the base pipe on the inflation. Since FEP is a crystalline fluoroplastic, the elastic modulus and hardness increase with the increase of crystallinity, and the tensile strength and elongation Long-term, flexural flexibility will be reduced accordingly. This is detrimental to the production of heat-shrinkable tubes because the bulge tubes require high tensile strength and elongation. Therefore, in the production of the base pipe should try to reduce the degree of crystallinity, so that the pipe is flexible, easy to blow molding.

  In summary, we know what factors FEP is affected by. For it, we must have enough knowledge to face, what problems can be solved. Users should also regularly maintain it, you can ensure that its work efficiency, reduce the occurrence of the accident.

Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML
Company Profile
ANJI JIAHE FLUOROURUBBER MADE PRODUCTS CO.,LTD is one of the leading China teflon sheet, PTFE sheet, teflon tube, PTFE tube, PTFE membrane manufacturers and suppliers, equipped with a productive teflon sheet factory, we are able to offer you cheap products. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
Contact Us
Address: Dahe Village, Xiaofeng Town, Anji County, Huzhou, Zhejiang, China (Mainland)
Tel: 0086-572-5501131  Fax:0086-572-5501133
Copyright © Anji Jiahe Fluorourubber Made Products Co.,Ltd