Anji Jiahe Fluorourubber Made Products Co.,Ltd
 
0086-572-5501131
ajjhptfe@aliyun.com

Product Categories

Contact Us

Anji Jiahe Fluorous Rubber Co.,Ltd

Add:Dahe Village, Xiaofeng Town, Anji County, Huzhou, Zhejiang, China (Mainland)

Con:Mr Hu

Tel:0086-572-5501131

Pho:15088678267

Fax:0086-572-5501133

E-mail:ajjhptfe@aliyun.com

Home > News > Content

Fluorine Rubber Is Self-reinforcing Rubber

Edit:Anji Jiahe Fluorourubber Made Products Co.,Ltd      Date:Jun 06, 2017

  Fluorine rubber is self-reinforcing rubber, high strength itself, reinforcing filler is mainly used to improve the process performance, reduce costs and improve the hardness of products, heat resistance and compression of permanent deformation.

  Viton is a highly saturated fluorinated polymer, generally can not be vulcanized with sulfur. The use of organic peroxides, organic amines and their derivatives, dihydroxy compounds and radiation curing. Industrial commonly used the first three methods, less selective radiation curing.

  Viton formulations are rarely used in plasticizers. Plasticizer will make the vulcanized rubber heat resistance and chemical stability deteriorated in the two high-temperature vulcanization often volatile escape, resulting in product weight loss, shrinkage deformation or blistering. Generally take and use a small amount of low molecular weight fluorine rubber to improve the process performance. Such as the molecular weight of 200,000 26 fluorine rubber, and with 10 to 20 molecular weight of 100,000 of 26 fluorine rubber, get kneading and molding performance of good rubber compound, the heat resistance of vulcanized rubber no significant impact. For shrinkage requirements of the fluorine rubber products, available dioctyl sebacate, trioctyl phosphate and high boiling point polyester and other plasticizers. When the amount is less (less than 5), the effect on vulcanized rubber is not significant.

  23 type fluorine rubber can be used dibutyl phthalate, fluorine wax (low molecular weight polychlorotrifluoroethylene) and polyisobutylene as plasticizer (amount of 3 to 5 copies), of which the best fluoride wax. Selection of low molecular weight polyethylene (1 to 3 copies), can improve the process of fluorine rubber. Carboxy nitroso fluoroethers commonly used fluorine-containing ether and halogenated hydrocarbon oil as plasticizer. Low viscosity hydroxyl silicone oil and dimethyl siloxane softening plastic fluorosilicone rubber.


ANJI JIAHE FLUOROUS RUBBER Co., Ltd

Add:Dahe Village, Xiaofeng Town, Anji County, Huzhou, Zhejiang, China (Mainland)

Con:Mr Hu

Tel: 0086-572-5501131

Pho:15088678267

Fax:0086-572-5501133

E-mail:ajjhptfe@aliyun.com


Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML
Company Profile
ANJI JIAHE FLUOROURUBBER MADE PRODUCTS CO.,LTD is one of the leading China teflon sheet, PTFE sheet, teflon tube, PTFE tube, PTFE membrane manufacturers and suppliers, equipped with a productive teflon sheet factory, we are able to offer you cheap products. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
Contact Us
Address: Dahe Village, Xiaofeng Town, Anji County, Huzhou, Zhejiang, China (Mainland)
Tel: 0086-572-5501131  Fax:0086-572-5501133
E-mail:ajjhptfe@aliyun.com
Copyright © Anji Jiahe Fluorourubber Made Products Co.,Ltd